There’s nothing more frustrating than spending a weekend painting your fence, only to see rust spots and peeling patches appear after the first change in seasons. This disappointing outcome often starts with a single, seemingly simple question: can you use fence paint on metal? The answer is that most general-purpose fence paints are designed for wood and simply can't provide the protection and adhesion that metal requires. To avoid the headache of a failed paint job, you need to approach the project with the right materials and techniques. This guide will provide a clear, step-by-step process for preparing and painting your metal fence to achieve a flawless, long-lasting finish you can be proud of.

Key Takeaways

Don't skip the prep work: Your paint job's success hinges on a clean, rust-free surface. Always take the time to wash, sand, and apply a dedicated rust-inhibiting primer before painting to ensure the topcoat adheres properly and lasts for years.
Match your paint to your metal: Not all paints are suitable for all fences. Choose a formula specifically designed for your fence material, whether it's iron, aluminum, or galvanized steel, to prevent peeling and ensure maximum protection against the elements.
Apply paint correctly and maintain it: For a durable, professional finish, apply two thin coats of paint instead of one thick one and always work in mild, dry weather. Afterward, inspect your fence annually and touch up any small chips to stop rust before it becomes a bigger problem.

Can You Use Fence Paint on Metal?

It’s a great question, and the short answer is: it depends. While some fence paints are formulated for multiple surfaces, grabbing any can off the shelf and applying it to your metal fence can lead to disappointment down the road. The key is to use a product specifically designed for metal to ensure the finish holds up against the elements and, most importantly, prevents rust. Many paints labeled for gates and railings are excellent choices, as they are created to adhere properly to metalwork and provide a durable, protective coating.

The current condition of your fence is a major factor in this decision. If you're dealing with a rusted iron fence, for example, you can't just paint over the problem. You’ll need special products designed to treat the existing rust and stop it from spreading. This is where proper preparation becomes non-negotiable. For a truly lasting finish, you must clean the surface thoroughly and use a dedicated rust-inhibiting primer. Even if a paint claims to be a "paint and primer in one," our professional residential painting experience has shown that a separate, high-quality primer is the best defense against future peeling, chipping, and corrosion. Skipping this critical step is one of the fastest ways to see your hard work undone, forcing you to start the project all over again much sooner than you’d like.

Find the Best Paint for Your Metal Fence

Walking down the paint aisle can feel overwhelming, especially when you’re looking for something specific for a metal fence. With so many cans promising the best results, how do you know which one will actually deliver? The secret isn't just about picking a great color; it's about choosing a formula that will protect your fence from rust and the elements for years to come. A quality paint job does more than just look good. It creates a durable barrier that stands up to Southern California's sun and occasional rain, keeping your fence looking sharp and structurally sound.

Making the wrong choice can lead to a lot of frustration down the road, like peeling, chipping, and rust spots that show up way too soon. That means you'll be back to scraping and repainting much sooner than you'd like. To avoid that headache, it helps to understand the main types of paint designed for metal surfaces. Each has its own strengths, and the best one for you depends on your fence's current condition and your long-term goals. Our residential painting services always start with selecting the perfect product for the job because we know that preparation and material choice are 90% of the battle. Let's look at the key options so you can choose with confidence.

Rust-Inhibiting Paints

Rust is the number one enemy of any metal fence. That's why your first line of defense should always be a product designed to stop it in its tracks. Rust-inhibiting paints and primers contain special additives that create a chemical barrier against corrosion. Even if your topcoat claims to be a "paint and primer in one," it's always a good idea to use a dedicated rust-inhibiting primer first, especially on older fences or those with existing rust. This extra step ensures the metal is fully protected before you even think about color. Think of it as the foundation for a paint job that will last.

Direct-to-Metal Paints

Direct-to-Metal (DTM) paints are exactly what they sound like: a single product designed to be applied directly to metal surfaces without a separate primer. These paints are a great time-saver because they combine the properties of a primer and a topcoat into one can. DTM paints are a good option for brand-new fences or those that are still in excellent condition with no signs of rust or corrosion. While they offer convenience, for a fence that has seen a few years or has any rust spots, we still recommend the belt-and-suspenders approach of a separate, high-quality primer for maximum protection and longevity.

Oil-Based vs. Water-Based Options

The classic debate: oil or water? When it comes to metal fences, both have their merits. Traditional oil-based enamel paints are known for creating an incredibly tough, durable, and rigid finish that resists scratches and wear. However, they take longer to dry and require mineral spirits for cleanup. On the other hand, modern acrylic latex (water-based) paints offer more flexibility, so they are less likely to crack or peel as the metal expands and contracts with temperature changes. They also dry faster and clean up easily with just soap and water. The right choice often depends on your priorities for durability versus ease of application. You can see beautiful examples of both finishes in our portfolio.

How to Prep Your Metal Fence for Painting

A beautiful, long-lasting paint job is all in the preparation. It’s tempting to jump straight to the painting, but skipping these initial steps is the number one reason a finish fails, leading to peeling, chipping, and rust spots within a year. Taking the time to properly prep your fence is what separates a quick fix from a professional-quality result that protects your investment for years to come. Think of it as creating the perfect canvas. A clean, smooth, and rust-free surface allows the primer and paint to bond correctly, giving you a durable finish that can stand up to the Los Angeles sun and seasonal changes. These are the exact steps our crews take to ensure every project meets our high standards for quality and longevity.

Clean and Degrease the Surface

First things first, your fence needs a thorough cleaning. Over time, metal fences collect a surprising amount of dirt, pollen, grease, and grime that can prevent paint from sticking. You can’t paint over dirt and expect it to last. For most fences, a bucket of warm water with a little dish soap and a stiff-bristled brush will do the trick. If you’re dealing with tougher grease stains, a dedicated degreaser can cut through the grime. Be sure to rinse the fence completely with a hose to wash away all the soap residue. Let it air dry fully before you even think about moving on to the next step. This foundational cleaning is a non-negotiable part of all our residential painting services.

Remove All Traces of Rust

Painting over rust is like putting a bandage on a problem that needs stitches. The corrosion will continue to spread underneath the new paint, eventually causing it to bubble, flake, and peel right off. You have to remove it completely. For light surface rust, a wire brush and some elbow grease are your best friends. Scrape away all the loose, flaky bits until you get back to the bare metal. For more stubborn spots, you might need to use sandpaper or a power drill with a wire wheel attachment. The goal is to eliminate every trace of corrosion to stop it from spreading and ruining your hard work down the line.

Sand for a Smooth Finish

Once the fence is clean and rust-free, a light sanding will give you the best possible surface for painting. Sanding does two important things: it smooths out any rough patches or ridges left behind from scraping old paint, and it creates a slightly textured surface, or "tooth." This microscopic roughness gives the primer something to grip onto, creating a much stronger bond than a slick, glossy surface would. Use a medium-grit sandpaper (around 120-grit is perfect) and scuff up the entire fence. When you’re done, wipe everything down with a clean, damp cloth to remove all the sanding dust. This final step ensures you get a flawless finish that looks truly professional.

Do You Really Need to Prime Your Metal Fence?

It’s a question we hear all the time. You’ve spent a weekend cleaning and sanding your metal fence, and the thought of adding another step before you can finally get to the color is tempting to skip. Priming can feel like an unnecessary delay, but taking this shortcut is one of the biggest mistakes you can make for the long-term health and beauty of your fence. Think of primer as the essential foundation for your paint job. Without it, you’re essentially building on shaky ground. The topcoat of paint simply won’t have anything to properly grip onto, leading to the peeling, chipping, and flaking you were trying to fix in the first place.

More importantly, for any metal exposed to the Los Angeles elements, primer is your number one defense against rust. It creates a protective barrier that seals the metal off from moisture and air, which are the key ingredients for corrosion. Skipping this step means rust can begin to form underneath the paint, bubbling up and ruining your hard work within a year or two. A professional paint job is about more than just color; it’s about protection and durability. Taking the time to apply the right primer ensures your fence not only looks fantastic but is also shielded from the elements for years to come. It’s the difference between a quick fix and a lasting investment in your home’s curb appeal.

The Benefits of Using a Metal Primer

So, what exactly does that coat of primer do? It’s working hard behind the scenes to guarantee a beautiful and durable finish. First and foremost, primer creates a strong bond. Metal is a smooth, non-porous surface, which makes it difficult for standard paint to adhere to. Primer is specially formulated to stick to the metal and create an ideal surface for the topcoat to grab onto. This is your best defense against peeling and flaking down the road.

Beyond adhesion, primer provides crucial protection against rust and corrosion. It acts as a sealed barrier, preventing moisture from reaching the metal itself. For iron and steel fences, this is an absolutely critical step. Finally, primer helps you achieve a flawless, even finish. It covers small imperfections in the metal and blocks any old colors or stains from bleeding through. This creates a uniform base, ensuring your final paint color looks rich, true, and consistent across the entire fence.

Choosing a Rust-Inhibiting Primer

When you’re standing in the paint aisle, you’ll notice there isn’t just one type of primer. For a metal fence, especially one made of iron or steel, you need to be specific. Look for a product labeled as a "rust-inhibiting" or "rust-converting" primer. These aren't just generic base coats; they contain special additives that chemically fight corrosion. A rust-inhibiting primer creates a barrier that stops rust before it can even start.

If you already have some surface rust that you’ve sanded down, a rust-converting primer is an excellent choice. It chemically reacts with the remaining rust particles, turning them into a stable, non-rusting surface that’s ready to be painted. Using the right primer for the job is a key part of our professional painting services, as it ensures the finish will last. Always check the product details to make sure it’s designed for the type of metal you’re painting.

Know When You Can Skip the Primer

While we almost always recommend priming, there are a few rare exceptions. The main one is if you are using a high-quality direct-to-metal (DTM) paint. These products are formulated as a paint and primer in one, designed to adhere directly to a prepared metal surface. However, there’s a catch. DTM paints typically only perform well on metal that is brand new or in perfect condition, with absolutely no signs of corrosion or previous paint failure.

Even when using a DTM paint, most professionals will still spot-prime any bare metal areas or spots where rust was previously treated. For older fences or any surface showing wear, a dedicated coat of primer is still the safest bet. Ultimately, skipping the primer is a gamble on the longevity of your paint job. For a finish you can count on for years, taking the extra step to apply a quality primer is always the right decision. You can see the difference this professional approach makes in our portfolio of completed projects.

Your Step-by-Step Guide to Painting a Metal Fence

Once you’ve done the prep work, you’re ready for the most satisfying part: the painting. A successful paint job is all about having the right materials, using a steady hand, and picking the perfect day. Following these steps will help you get a durable, professional-looking finish that protects your fence for years to come. It’s a process that requires patience, but the results are well worth the effort. Let’s walk through exactly how to get it done right.

Gather Your Tools and Materials

The success of your paint job really depends on how well you prepare. Before you even think about opening a can of paint, make sure you have everything you need. A trip to the hardware store mid-project is a momentum killer. You’ll want a wire brush, sandpaper, a degreasing cleaner, cloths, drop cloths, and painter's tape. For safety, grab some gloves and goggles. Most importantly, you’ll need a quality rust-inhibiting primer and a direct-to-metal paint. Always use a dedicated primer for metal, even if the paint claims to be a two-in-one product. This extra step is your best defense against future rust and is a non-negotiable part of any professional residential painting project.

Apply the Paint Like a Pro

With your fence prepped and primed, it’s time to apply the color. For any stubborn rust spots you couldn't completely sand away, a rust converter can be applied before the primer to create a stable surface. When you’re ready for the topcoat, remember this pro tip: apply two thin, even coats of paint instead of one thick one. A single heavy coat is prone to drips and doesn't cure as effectively, which can lead to peeling later on. Thin coats create a smoother, stronger finish that lasts much longer. Use a small brush for detailed areas and a roller or sprayer for larger, flat surfaces to ensure even coverage. You can see examples of beautifully finished projects in our portfolio to get inspired.

Pick the Perfect Day to Paint

Your timing is just as important as your technique. Always check the weather forecast before you start. The ideal conditions for painting are a calm, overcast day with moderate temperatures and low humidity. You’ll want to avoid painting in direct sunlight, as the heat can cause the paint to dry too quickly, leaving you with brush marks and an uneven finish. High humidity or impending rain can also ruin your hard work by introducing moisture that prevents the paint from curing properly. Planning around the weather ensures your paint adheres correctly and dries to a hard, durable finish. If you’d rather leave the planning and execution to an expert, you can explore our full range of services.

What Happens When You Use the Wrong Paint on Metal?

Choosing the right paint for your metal fence goes far beyond picking a color. The wrong formula can lead to a whole host of problems that are frustrating to look at and even more frustrating to fix. Using a paint that isn't designed for metal surfaces is a recipe for failure, turning what should be a protective coating into a peeling, rusty mess. Let’s look at what happens when the wrong paint is applied and why doing it right the first time is so important.

Why the Wrong Paint Peels and Flakes

Have you ever seen paint peeling off a metal gate in long, sad strips? That’s usually a sign of poor adhesion. Metal is a smooth, non-porous surface, and it requires a paint that can grip it tightly. Standard interior or exterior house paints just aren't formulated for this. Without the right bond, the paint film simply sits on top of the metal. As the fence expands and contracts with temperature changes, the paint can't flex with it. This leads to cracking, flaking, and peeling, leaving the metal exposed and your fence looking neglected. Proper residential painting projects always start with the right materials for each specific surface.

How Bad Paint Leads to Faster Rusting

The number one enemy of any iron or steel fence is rust. A quality paint job serves as a protective shield, sealing the metal off from moisture and oxygen. When you use the wrong paint, that shield is weak and full of holes. Without the right primer and topcoat system, "the metal will be more likely to rust, especially outside or near water/salt." Once rust starts, it can spread quickly underneath the paint film, causing bubbling and lifting. Before you know it, you have a serious corrosion problem that compromises the strength and integrity of your fence, requiring extensive repairs or even replacement.

The Hidden Cost of a Bad Paint Job

Saving a few dollars on a cheaper, incorrect paint might feel like a win, but it’s a short-sighted one. A poorly executed paint job will fail quickly, often within a year or two. You’ll be left having to scrape, sand, and strip all the failed paint before you can even think about starting over. As we always say, a great paint job is about 80% preparation. A high-quality finish on a metal fence should last five to ten years, making the initial investment in proper materials and prep work well worth it. You can see the difference this makes in our project portfolio.

How to Choose Paint for Different Metal Fence Types

Choosing the right paint for your metal fence isn’t a one-size-fits-all situation. The type of metal you’re working with is the single most important factor in getting a finish that looks great and lasts for years. An aluminum fence has very different needs than a wrought iron one, and using the wrong products can lead to peeling, chipping, and rust. Think of it like this: you wouldn't use wall paint on your floor, right? The same logic applies here. Let’s walk through the best approach for the most common types of metal fences so you can get the job done right the first time.

Painting an Aluminum Fence

Aluminum is a fantastic material for fences because it’s lightweight and doesn’t rust. However, it can still oxidize over time, creating a chalky, pitted surface if left unprotected. For aluminum, you’ll want a paint that can handle temperature changes without getting brittle. That’s why acrylic latex paints are an excellent choice. They are more flexible, so they resist cracking as the metal expands and contracts in the sun. Plus, they are much easier to clean up. Look for a high-quality direct-to-metal (DTM) acrylic paint. This type of paint is made to bond directly to the metal, giving you a durable, long-lasting finish that keeps your fence looking sharp.

Tips for Steel and Iron Fences

When it comes to steel and wrought iron fences, your number one enemy is rust. Your entire painting strategy should focus on preventing it. This starts with the right primer. Don't skip this step, even if your paint says it has primer in it. A separate, rust-stopping primer is essential for outdoor metal fences to prevent rust and help the topcoat stick properly. If you’re dealing with a fence that already has some rust, use a "rusty metal primer" or a rust converter on the stubborn spots first. For the paint itself, a high-quality, oil-based enamel provides a hard, durable finish that offers the best protection against moisture and wear. This combination is the key to the beautiful, lasting results you see in our portfolio of work.

What to Know About Galvanized Metal

Galvanized metal can be tricky. It’s essentially steel that has been dipped in a protective zinc coating to prevent rust. While this is great for durability, that zinc layer creates a slick, sometimes oily surface that paint struggles to adhere to. If you apply standard paint directly to a galvanized fence, it’s almost guaranteed to peel off. The secret is using the right primer. You need a specific product called a galvanized metal primer. This type of primer is formulated to bond with the zinc coating, creating a stable surface that your topcoat can grab onto. Once you’ve primed correctly, you can use a quality acrylic latex paint for a beautiful finish. Proper prep is everything with galvanized metal.

Common Metal Fence Painting Mistakes to Avoid

Painting a metal fence can feel like a straightforward weekend project, but a few common missteps can turn your hard work into a peeling, rusty mess in just a few months. The difference between a finish that lasts for years and one that fails after a single season often comes down to avoiding a few key mistakes. These are the details that can make or break your project, turning a simple update into a recurring chore.

Think of it as the difference between a quick fix and a long-term solution. Rushing the job or cutting corners might save you a few hours now, but it will almost certainly cost you more time and money down the road when you have to scrape everything off and start over. A professional-looking finish requires a professional approach, even if you're doing it yourself. By understanding what not to do, you can ensure your fence not only looks great but is also properly protected from the elements. Let’s walk through the most common pitfalls so you can get the job done right the first time.

Skipping the Prep Work

If you take away just one piece of advice, let it be this: your paint job is only as good as the surface underneath it. Skipping preparation is the number one reason metal fence paint fails. Paint needs a clean, dry, and slightly textured surface to grab onto. If you try to paint over dirt, grease, or rust, the paint will stick to the grime, not the fence itself.

Before you even think about opening a can of paint, you must thoroughly clean the fence, scrape away any loose or flaking paint, and sand down any remaining rust. This creates a stable foundation for the primer and paint to adhere to, ensuring a smooth and durable finish. Proper prep work is the cornerstone of all high-quality exterior painting, and your fence is no exception.

Mixing Incompatible Products

It’s tempting to grab an all-in-one "paint and primer" product to save a step, but for an outdoor metal fence, this is usually a mistake. Primers and paints are designed for different jobs. A dedicated rust-inhibiting metal primer is formulated to bond tightly to the metal and, most importantly, stop rust from forming. The topcoat of paint is designed to provide color and protect the surface from sun, rain, and wear.

Using a separate, high-quality primer ensures your fence gets the best defense against corrosion. For fences with existing rust, you might even need a special "rusty metal primer" or a rust converter to neutralize the corrosion before you begin. Always read the product labels to ensure your primer and paint are compatible with each other for the strongest possible finish.

Painting in Bad Weather

Your choice of painting day is more important than you might think. The weather has a huge impact on how well your paint applies and cures. The ideal conditions are a calm, overcast day with moderate temperatures and low humidity. Painting in direct, hot sunlight can cause the paint to dry too quickly on the surface, trapping solvents underneath and leading to bubbles and blisters.

On the other hand, painting in very humid conditions or when rain is on the way can introduce moisture into the paint film. This prevents it from curing properly and can lead to a weak finish that peels easily. Always check the forecast and give your fence plenty of time to dry completely in the right conditions. Patience here will pay off with a finish that looks better and lasts much longer.

How to Maintain Your Newly Painted Metal Fence

Your beautiful, freshly painted metal fence does so much for your home's curb appeal. Now that the hard work is done, a little upkeep will ensure it stays looking fantastic for years. Think of it less as a chore and more as protecting your investment. Regular maintenance is the key to preventing small issues from turning into big, costly problems. By catching things early, you can keep your fence in pristine condition with minimal effort, avoiding the need for a full-scale repaint sooner than necessary.

A well-maintained fence not only looks great but also stands strong against the elements. This simple routine will help you preserve that perfect finish and ensure your fence remains a highlight of your property. It’s all about being proactive, and luckily, it doesn’t take much time at all. I’ll walk you through a straightforward process for inspections and touch-ups that anyone can handle.

Inspecting Your Fence Regularly

Set aside some time once or twice a year to give your fence a good look. A quick walk-around is all it takes to spot potential trouble. Look closely for any small chips or scratches, especially in areas that see a lot of traffic or are exposed to sprinklers. These tiny blemishes are the perfect entry point for rust. Catching them right away is the most important part of your residential painting maintenance. By addressing these spots immediately, you stop rust before it has a chance to spread and cause real damage, keeping your fence’s finish flawless and its structure sound.

Quick and Easy Touch-Up Tips

When you find a small chip or a spot of rust, a quick touch-up will do the trick. First, gently sand the area to remove any loose paint or rust. If you do find rust, it’s a good idea to apply a rusty metal primer to that spot to stop it from creeping back. Once prepped, apply a thin, even coat of your matching fence paint. For the most durable and seamless repair, it’s best to apply a second thin coat after the first one has dried completely. This simple fix will blend right in, making your fence look as good as new and ensuring that professional finish lasts.

Know When to Call a Pro for Your Fence Project

Tackling a DIY project can be incredibly satisfying, but it’s also important to know when a job is better left in professional hands. Painting a metal fence, especially a large or intricate one, can quickly become more complex than it seems. If you’re aiming for a finish that not only looks great but also provides long-term protection, calling a professional painting team is often the smartest move. It saves you from potential frustration, costly mistakes, and the hassle of redoing the work in a year or two.

A professional crew has the experience, tools, and product knowledge to handle the project efficiently and deliver a durable, flawless finish. They can properly diagnose any underlying issues, like deep-seated rust or failing old paint, and apply the right solutions. For many homeowners, the peace of mind that comes with knowing the job is done right is well worth the investment. It frees up your weekends and ensures your fence enhances your home’s curb appeal for years to come.

When the Damage is Widespread

Take a close look at your fence. If you see more than just a few small rust spots or minor chips, it’s a strong sign you need professional help. Widespread peeling, flaking paint, or extensive rust across multiple sections indicates that the surface needs serious attention before any new paint is applied. This level of prep work often goes beyond simple sanding and cleaning. It might require specialized tools for stripping old coatings or addressing deep corrosion, which is a job best handled by an experienced residential painting team. A pro can ensure all the damage is properly treated, creating a sound surface for a lasting new finish.

If You're Unsure About the Process

Feeling uncertain about which primer to use or how to handle a specific type of metal? That’s a good reason to call in an expert. Different metals, like wrought iron, aluminum, and galvanized steel, have unique needs. Using the wrong products can lead to poor adhesion, peeling, and premature rusting. Professionals understand the science behind the paint and can choose the right primer and topcoat for your specific fence. They take the guesswork out of the equation, ensuring every step, from prep to final coat, is done correctly for maximum durability.

You Want Guaranteed, Long-Lasting Results

Ultimately, hiring a professional is about investing in a high-quality, worry-free outcome. Instead of spending multiple weekends on a labor-intensive project, you can trust a skilled team to handle it all. They have the techniques to achieve a smooth, even finish that’s tough to replicate with DIY methods. Plus, a professional job is built to last, protecting your fence from the elements and keeping it looking beautiful for years. If your goal is a stunning, durable finish that adds value to your property, looking at a professional portfolio can show you the kind of results you can expect.

REQUEST YOUR FREE ESTIMATE

Frequently Asked Questions

What's the single most important step for a long-lasting finish? Without a doubt, it's the preparation. A beautiful paint job can fail in less than a year if it's applied to a dirty, rusty, or poorly prepared surface. Taking the time to thoroughly clean the fence, remove every trace of rust, and lightly sand the surface is what creates a stable foundation for the primer and paint to bond to. It’s the difference between a quick fix and a professional result that protects your fence for years.

Are 'paint and primer in one' products good enough for a metal fence? While these products can be convenient for some projects, we almost always recommend using a separate, dedicated primer for an outdoor metal fence. Primer is formulated specifically to bond to smooth metal and create a barrier against rust. A separate primer provides superior adhesion and corrosion protection, which is critical for any metal exposed to the elements. Think of it as essential insurance for the longevity of your paint job.

How long should a professional paint job on a metal fence last? When a metal fence is properly prepared and painted with high-quality materials, the finish should last for many years, often between five and ten. The lifespan depends on factors like sun exposure, moisture, and the type of paint used. Regular inspections and quick touch-ups on any small chips or scratches can extend the life of the paint job even further, keeping your fence looking great and well-protected.

My fence only has a few small rust spots. Can I just paint over them? Painting directly over rust is one of the biggest mistakes you can make. The corrosion will continue to spread underneath the new paint, causing it to bubble, flake, and peel off much sooner than you'd expect. You must completely remove the rust with a wire brush or sandpaper and then apply a rust-inhibiting primer to the bare metal before painting. This stops the corrosion and ensures your new finish lasts.

Is it better to use a brush, roller, or sprayer to paint a fence? The best method often involves a combination of tools. A sprayer is excellent for applying a thin, even coat quickly across large, flat sections of a fence. However, a brush is essential for detailed work, like intricate scrollwork or tight corners, to ensure complete coverage. A small roller can also be effective on flat bars or posts. Using the right tool for each part of the fence helps you achieve a smooth, professional-looking finish without drips or missed spots.

gallery